Articles from Vadzo Imaging

Vadzo's Falcon-234CGH is a 2MP AR0234 Autofocus USB Camera built on the Onsemi AR0234 Sensor, delivering color global shutter imaging at 1920x1200 with VCM-based autofocus, UVC compliance, and 1080p@60fps streaming for digital signage analytics, audience measurement, kiosk, and retail intelligence applications where sharp face imaging across variable subject distances is a hard system requirement. As part of Vadzo's USB camera series, this AR0234 Global Shutter Autofocus USB 3.0 Camera pairs simultaneous full-pixel global shutter capture with motorized VCM autofocus to deliver geometrically accurate, sharp face images at variable subject distances without host-side focus management overhead.

The Falcon-821CRH and Falcon-821CRS are 8MP 4K HDR USB 3.2 Gen1 cameras built on the Onsemi HyperLux AR0821 sensor, offered as a scalable OEM camera platform with VCM autofocus imaging in the CRH variant and fixed focus imaging in the CRS variant. Both models deliver 8MP (3848 × 2168) color rolling shutter output with dual-mode eHDR and LI-HDR, S-Mount (M12) lens compatibility, and UVC plug-and-play integration across Windows, Linux, and macOS. Target applications span document scanning, OCR imaging, identity verification, passport scanning, barcode reading, quality inspection, defect detection, robot guidance, pick and place automation, object tracking, and autonomous navigation.

Vadzo Imaging explains why the AR0234 Global Shutter USB Camera consistently delivers motion-blur-free results in Automatic Number Plate Recognition deployments, addressing the shutter architecture constraint that disqualifies rolling shutter alternatives, NIR sensitivity, hardware trigger synchronization, and frame timing requirements across its Falcon-234MGS and Falcon-234CGS from the USB camera series.

Vadzo's Bolt-544MRS is an AR0544 MIPI CSI-2 Camera built for OEM teams who need 5MP monochrome imaging in battery-operated, space-constrained embedded products - medical wearables, smart access devices, and edge AI platforms where standard 5MP sensors exceed the power budget. Built on the Onsemi AR0544 HyperLux LP, a 1/4.2" BSI Stacked CMOS sensor with 1.4 µm pixel pitch, 60 fps, eDR and LI-HDR modes, and Wake on Motion, the Bolt-544MRS is a purpose-built AR0544 Low Power MIPI CSI-2 Camera that joins Vadzo's MIPI camera series as a compact, V4L2-compatible module for NVIDIA Jetson and Raspberry Pi platforms over 2-lane MIPI CSI-2.

Every industrial motion analysis failure that surfaces at integration has the same origin. The sensor captured what was in front of it. It just did not capture it all at the same moment. Vadzo Imaging introduces the AR0235 HyperLux SG monochrome global shutter module for high-speed motion analysis, examining how simultaneous pixel capture, 120 FPS full resolution output, on-chip trigger synchronization, and a validated industrial operating range define an embedded vision camera built for machine-speed deployments where motion integrity is the first requirement.

The Falcon-544CRA is a 5MP Color Rolling Shutter USB 3.2 Gen1 Camera built on the Onsemi HyperLux LP AR0544 sensor with VCM autofocus. It is designed for robotics, AGV navigation, UAV and drone imaging, kiosk stations, traffic monitoring, security and video surveillance, medical imaging, and industrial inspection. It delivers a 5MP autofocus USB camera with VCM autofocus, auto exposure, and USB 3.2 Gen1 connectivity at full resolution with driver support for Windows, Linux, and macOS in a compact S-Mount form factor.

The Falcon-821CRS is an 8MP AR0821 HDR USB Camera built on the Onsemi AR0821 HyperLux CMOS sensor. It is designed specifically for intelligent traffic cameras, ITS infrastructure, smart intersection systems, license plate recognition, roadway monitoring, and traffic management system deployments. It delivers true 8MP color imaging with intelligent iHDR and auto exposure at full resolution over USB 3.2 Gen1 with driver support for Windows, Linux, and macOS in a compact S-Mount form factor.

Vadzo's Bolt-830CRH native 4K color imaging at up to 60fps in linear mode with VCM-driven autofocus, 100 dB dynamic range in LI-HDR mode, and direct 4-lane MIPI D-PHY integration for OEM deployments in facial recognition, biometrics, smart access, retail analytics, autonomous shopping, and remote patient monitoring applications where autofocus precision and HDR performance are hard system requirements. As a compact AR0830 Autofocus MIPI Camera in Vadzo's MIPI CSI-2 camera series, the Bolt-830CRH delivers native 4K color output with on-sensor HDR and motorized autofocus directly to the host SoC ISP, without USB or network overhead.

The Falcon-544MRS is a 5MP Monochrome Rolling Shutter USB 3.2 Gen1 Camera built on the Onsemi AR0544 Hyperlux LP sensor. It is designed for industrial inspection, robotics vision, microscopy, barcode reading, NIR imaging, and production line inspection. The Falcon-544MRS delivers a 5MP monochrome USB camera with Wake on Motion, enhanced NIR response at 850nm and 940nm, eDR and LI-HDR modes, and auto exposure at full 5MP resolution with driver support for Windows, Linux, and macOS in a compact S-Mount form factor.